You are trying to reset your password. The site says “check your inbox for a password reset email”. But there is no email in your inbox. Or the count email is not getting to your inbox. AOL, Yahoo and others may block email to protect you from unwanted email. In this case, they are mistaking email that you want for spam.
To avoid this you need to “whitelist” the sender, but this is slightly different for each different email program and service.
What Is Whitelisting?
The solution is to tell your email program (Gmail, Yahoo, Outlook etc.) that mail from email@example.com or firstname.lastname@example.org is not spam. To do this you need to add the email address to a “whitelist”.
The method varies slightly depending on which email provider or program you use.
Always Whitelist Emails In Your Spam/Junk Mail Folder
If you find an email in your spam folder that is not spam always take a moment to mark it as “not spam” or “not junk”, this automatically let’s your email program add the sender to the whitelist.
How To Whitelist email@example.com or firstname.lastname@example.org
Find your email service or email client and click the link get to the instructions below. You need to whitelist the following email addresses.
email@example.com firstname.lastname@example.org or *@livekingdomhall.com
Configure your email service or client from this list:
- First, if you find email from livekingdomhall.com in your Gmail spam folder, select our email and click the “Not Spam” button
- Next, open an email that you have received from us
- Click on the little down-pointing-triangle-arrow next to “Reply”:
- Click “Add to Contacts list”
Yahoo!/SBC Gobal/ATT.net Mail Whitelist:
You must set up a “filter”, but first:
- If you find email from livekingdomhall.com in your “Yahoo! bulk” folder, open the email and click “Not Spam”.
- If you find mail from livekingdomhall.com in your “Blocked Addresses” list in "Settings", select the email and click “Remove Block”.
Now to create the filter:
- Open Yahoo! Mail and click on the Gear and select “Settings” in the upper right hand corner or "...More" icon in the Nav bar.
- Select “Filters” (in the bottom left corner), or select "Filter Emails Like This..."
- On the Filters page, click “Add”
- Select the “From header:” rule, and add “contains” and add "livekingdomhall.com".
- Click the “Choose Folder” pull down menu and select "Inbox".
- Pick the Add Filter button or "Save"
AOL.com Webmail Whitelist:
You must add email@example.com and firstname.lastname@example.org AOL address book as follows:
- Search for email from us in the Spam folder. If you find an email in the Spam folder, then open it and click the “Not Spam” button.
- Click the Contacts link (or open your AOL Address Book)
- Click the +New button.
- In the New Contact window, email@example.com into the ‘Primary E-Mail 1’ field
- Click Another email, and enter firstname.lastname@example.org into the E-Mail 2 address
- Click “Create”
AOL Email Client Whitelist:
New Subscribers: add the “From address” to your AOL address book:
- Click the Mail menu and select Address Book.
- Wait for the “Address Book” window to pop up, then click the Add button.
- Wait for the “Address Card for New Contact” window to load.
- Once loaded, cut and paste the From email address into the “Other E-Mail” field.
- Make our From address the “Primary E-Mail” address by checking the corresponding checkbox.
- Click the Save button.
Existing Subscribers: If you are already a subscriber but the email isn’t getting through, the email may be in your AOL Spam Folder. Open web mail and look in your Spam Folder. If your find our email in your spam folder open it and click the “This Is Not Spam” button. Then add the “From address” onto your Address Book as outlined in the “New Subscribers” instructions above.
We receive automated emails from a domain other than the one we use for staff and some of these emails were getting misidentified as spam and moved to people’s Junk Email folders in Outlook. So we needed to white list the domain so that any emails originating from there would bypass the spam filter.
- In the Exchange admin center click on Mail Flow.
- Next create a new rule by clicking on the + icon and click Bypass spam filtering…
- Select on the *Apply this rule if… for The sender… domain is livekingdomhall.com
- Add the domain you wish to whitelist plus any additional domains you also wish to whitelist.
- Select Stop Processing more rules and then click save.
You must add email@example.com or firstname.lastname@example.org to your “Safe List” as follows:
- First, if you find email from livekingdomhall.com in your Hotmail junk folder, open the email and click “Not Junk”
- Next, check to see if the livekingdomhall.com appears in the “Blocked Senders” list. If so, select it and click on the “Remove” button.
- Next, open your mailbox and click “Options” in the upper right hand corner
- At the top of the page, click on the “Junk E-mail Protection” link
- Next, click on “Safe List”, which is down near the bottom
- Copy and paste email@example.com or firstname.lastname@example.org where it says “Type an address or domain”
- Click the “Add” button
Microsoft Outlook Whitelist:
- On the Tools menu, click Options
- On the Preferences tab, click Junk E-mail
- On the Safe Senders tab, click Add
- Add email@example.com or firstname.lastname@example.org where it says “Add address”.
- Click OK
How can I make sure that messages from a specific e-mail address are not considered spam?
To open the product, double-click the product icon at the bottom right corner of your screen. To allow messages from specific e-mail addresses, follow the instructions below. You can also do this through the Spam Control menu button (in Microsoft Outlook, Outlook Express or Windows Mail), or by right-clicking the system tray icon. You can add, edit or remove individual e-mail addresses or whole domains to your allowed senders list. For example, if you add *@example.com to your allowed senders list, all e-mail messages from the example.com domain are allowed.
To edit your list of trusted e-mail addresses:
- On the main page, click Settings.
- Select Internet > E-mail filtering.
- Click Allow senders. The Allow senders settings page opens.
Choose one of the following actions.
To add a new e-mail address:
- Click Add. The Add sender/domain dialog box opens.
- In the Address field, enter the e-mail address or domain name from which you want to allow e-mail messages. You can add a short description for the new address in the Description field.
- Click OK. The new e-mail address is now shown on your allowed senders list.
To edit an e-mail address:
- In the list, select the e-mail address you want to edit, and click Edit. The Edit sender/domain dialog box opens.
- Edit the selected e-mail address, and click OK.
To remove an e-mail address from the allowed senders list:
- In the list, select the e-mail address you want to remove
- Select Remove. The e-mail address is removed from the list.
Mozilla Thunderbird Whitelist:
You need to add us to your address book, and set the Junk Mail Controls to whitelist your address book.
- First, check your Junk folder. If you find email from email@example.com or firstname.lastname@example.org , right-click on our email and choose “Mark as Not Junk”
- Next, click the “Address Book” button
- Highlight the Personal Address Book (left column)
- Click on “New Contact”
- In the “Contact” tab, set “Email” to email@example.com or firstname.lastname@example.org
- Set “Additional Email to email@example.com or firstname.lastname@example.org
- Click “Ok” and close the Address Book
- From the main Thunderbird menu, choose “Tools > Account Settings”
- For each email account, expand the settings and choose “Junk Settings” from the expanded account settings.
- Ensure “Personal Address Book” is checked under “Do not mark mail as junk if the sender is in:”
- Once you have done this for each email account, click OK
- Scroll up to message from email@example.com or firstname.lastname@example.org
- Get to the field where their name is listed, click the Berry button and then click Show Address.
- Select and copy the email address to the clipboard.
- Go into Address Book and find the user.
- Select Save.
- Click to edit it, and then click the Berry button to add another email address.
- Paste it in and click Save
Comcast Email Whitelist:
- Sign into Webmail.
- On the left navigation menu, click Address Book.
- Click Add Contact.
- Under the General tab, in the box under the Email Address, enter email@example.com or firstname.lastname@example.org
- Repeat for email@example.com or firstname.lastname@example.org
- Click the Add button.
- If you have enabled “Restrict Incoming Email,” also do the following:
- Select Preferences.
- Select “Restrict Incoming Email”. If Enable Email Controls is set to Yes, then you are restricting incoming emails.
- Select Allow email from addresses listed below.
- Enter email@example.com or firstname.lastname@example.org
- Click the Add button.
Earthlink Email Whitelist:
- Click the Address Book button to open your address book in the browser.
- Click the Add Contact button (if you use EarthLink 5.0 or higher, click the Add button).
- Type in email@example.com or firstname.lastname@example.org into the email address slot and then click OK.
- Repeat for email@example.com or firstname.lastname@example.org
Verizon.net Email Whitelist:
- Go to your account and click on the Address Book link in the left column.
- Select Create Contact.
- The Add Address Book Entry screen appears. In the Email field, enter email@example.com or firstname.lastname@example.org
- In the Nickname field, type livekingdomhall.com
- Select Save.
- Do the same for email@example.com or firstname.lastname@example.org
Apple Mail / OSX Whitelist:
- First, if email from email@example.com or firstname.lastname@example.org ends up in your junk folder, highlight or open it and click “Not Junk” at the top of your screen.
- Go to “Mail” > “Preferences”
- Go to “Mail” > “Preferences” Go to the Rules tab
- Select Add Rule
- Give this rule a name such as “Email from email@example.com or firstname.lastname@example.org ”
- Create a rule that says “If any of the following conditions are met: ‘From’ ‘Contains’” and then paste in “email@example.com or firstname.lastname@example.org”
- From the actions, select ‘Move message’ to mailbox ‘Inbox’.
- Click “OK”
- Log into your Postini account
- Look the Junk area
- If you find email email@example.com or firstname.lastname@example.org check the checkbox to select the email
- Click the “Deliver Selected” link at the top of the Junk screen
- On the next screen, click the “Approve Sender” checkbox next to the email
- Click the “Approve Selected Senders” button
- Do the same for each email from email@example.com or firstname.lastname@example.org
This error indicates that your email was blocked as spam by our Signaturing anti-spam filter. Follow these steps to resolve the issue:
- If the problem persists, contact the recipient by other means and request that your email address be added to their Symantec.cloud approved senders list. Additionally, you can submit a legitimate email which has been incorrectly given a verdict of spam for analysis and filter review. See False positive submissions to submit a false positive message for analysis.
Whitelisting Email in Other Email Applications & Webmail Services
If you use a Web mail system or email application adding the “From” address to your “address book”, “safe list”, “whitelist” or “contact list” will usually work.
Also, check your “spam”, “bulk” or “junk” folder. If the email is there look for a way to indicate that it is not spam. For example by selecting the email and clicking a button such as “Not Spam” or “Not Junk”.